Shuttering Oil

Approx. Rs 69.35 / LitreGet Latest Price

PASAND ECO-RELEASE EMULSION

Vegetable oil based, Concentrated and Emulsified form release agent

Uses

Pasand Eco-Release Emulsion is used for easy, stain free release of concrete moulds and formwork of all types.

Features and Benefits

·         Non-staining: No cleaning of oil stains

·         Excellent quality: Delivers fair faced smooth finish concrete

·         Versatile: Can be used on all types of moulds

·         Concentrate form: Reduces storage and transportation costs

·          Eco-friendly: vegetable oil based, bio-degradable

Description

Pasand Eco-Release Emulsion is a vegetable oil based, eco-friendly shuttering oil supplied as amber brownish liquid, which turns off-white when diluted in water. It produces a chemical release agent to form a thin film on the surface of the formwork, which enables easy stripping from the hardened concrete. 

Coverage

 1:5 water dilution covers 80–160 m² depending on the formwork. Untreated timer or plywood: 80-100 m² / 6 ltr of solution. Metal or treated timber: 120-160/ 6 ltr of solution.

Application

Pasand Eco-Release Emulsion in ration of 1:5 with clean water, using a clean container and stirring thoroughly until evenly mixed. If the solution is not used the same day, it should be stirred again before use.

Technical Specifications

How to Use

Apply Pasand Eco-Release Emulsion 1:5 water diluted solution to the face of the formwork by spray, roller brush or cloth. Only one coat should be applied, as thinly as possible except on very absorbent new timber where two coasts may be necessary for first application only. Allow the coating to dry.

If the formwork is not used for several days, a further coat may be applied before use.

Drying time: It is essential that Pasand Eco-Release Emulsion is thoroughly dry before placing concrete. In condition of high humidity drying times will be much longer than in warm dry conditions.

Rainfall: It is necessary to protect freshly coated formwork from rain, which may dilute the emulsion before it has dried. After drying the coating will withstand an occasional light shower but may be affected by heavy or continuous rain. In such cases, a further coat is advised once surfaces have dried out thoroughly.

Before re-use of formwork: The cleaned formwork surfaces must be re-coated with Pasand Emulsion each time as per normal practice.

Packing

Pasand Eco-Release Emulsion is packaged in 200 litre HDPE drums.

Storage & Handling

Pasand Eco-Release Emulsion has shelf life of 12 months. The product is non-flammable. 

Additional Information:

Approx. Rs 49 / LitreGet Latest Price

PASAND ECO-RELEASE ALUMINIUM

Vegetable oil based, ready to use, mould release agent

Uses
Pasand Eco-Release Aluminium is used for easy, stain free release of concrete moulds and formwork of all types including Aluminium, wooden and steel.

Features and Benefits

* Versatile: can be used for all concrete formworks including aluminium, wooden and steel

* Ready to use: ensures fast, clean stripping of forms

* Non-staining: delivers stain-free finish

* Eco-friendly: vegetable oil based, bio-degradable

Description
Pasand Eco-Release Aluminium is a ready-to-use, vegetable oil based form release agent supplied as amber brownish liquid. It forms a thin film on the surface of the formwork, which enables easy stripping from the hardened concrete to produce smooth uniform finish with reduced incidence of blow holes.

Coverage
Pasand Eco-Release Aluminium covers 20 – 50 m2 /ltr depending on the smoothness and porosity of the formwork.

Application
Apply Eco-Release Aluminium before the first casting and thereafter re-apply immediately after stripping and cleaning the mould.

New moulds: No preparation is normally necessary. Metal moulds showing signs of rust must be wire brushed and cleaned before application. New Woodwork: Untreated timber and Plywood may require a second coat for first application only. Treated woodwork should require just a single coat.

Technical Specifications

Appearance: Clear Amber liquid

Flash Point: Non-flammable

Density:  0.95 – 0.99 at 27°C

Viscosity:  15 – 25 sec at 27°C (B4 cup)

How to Use
Pasand Eco-Release Aluminium should be applied using roller brush or lightweight horticultural sprayer (knapsack type).

Only one coat should be applied, as thinly as possible, except on very absorbent new timber where two coasts may be necessary for first application only. If the formwork is not used for several days, a further coat may be applied before use.

Drying time: It is essential that Pasand Eco-Release WS is thoroughly dry before placing concrete. Otherwise, its performance may be impaired. In condition of high humidity drying times may be much longer than warm dry conditions.

Rainfall: It is necessary to protect freshly coated formwork from rain, which may dilute the product before it has dried. After drying the coating will withstand an occasional light shower but may be affected by heavy or continuous rain. In such cases, a further coat is advised once surfaces have dried out thoroughly.

Before re-use of formwork: The cleaned formwork surfaces must be re-coated with Pasand Eco-Release each time as per normal practice.

Packing
Pasand Eco-Release Aluminium is packaged in 200 litre HDPE drums.

Shelf Life & Handling

Pasand Eco-Release Aluminium has shelf life of 12 months. Gloves should be worn when handling the material. Splashes to eyes and skin should be washed with water and treated immediately. Reseal container after use.

Additional Information: